SLIPON FLANGES

Alloyed Sustainables LLP is a prominent manufacturer, stockist, and exporter of Slip-on Flanges. There are two types of slip-on flanges: those with a Raised Face (RF) and a Flat Face (FF). Because it is used to connect pipes, valves, pumps, and other piping system components, the height of a Slipon Raised Face Flange (SORF) is crucial to the functionality of piping systems. Slip-on Flanges available at Alloyed Sustainables are offered in various materials, including Alloy Steel Slip-on Flange, Carbon Steel Slip-on Flange, LTCS Slip-on Flange, Copper And Nickel Slip-on Flange, Stainless Steel Slip-on Flange, Hastelloy Slip-on Flange, Inconel Slip-on Flange, etc.

A slip-on flange is a circular type of flange that is crafted to smoothly fit over the tip of a pipe and then be securely welded into position. Also known as a SO flange, this design enables the insertion of the pipe into the inner opening of the flange. Subsequently, the upper and lower sections of the flange can be joined to the pipe through lap welding. Slip-on Flanges manufactured by Alloyed Sustainables adhere to recognized standards like ANSI/ASME B16.5, B16.47, B16.48, DIN, AWWA, and API. These flanges find widespread use in piping systems across diverse industries, such as petrochemicals, oil and gas, water treatment, and more.

Key Features of Slip-on Flanges:

• Attachment Design: Slip-on flanges are designed to slip over the end of a pipe and then be welded in place. This design simplifies installation.
• Face Types: They come with either a flat face or a raised face. The raised face provides a sealing surface when the flange is attached.
• Welding: Slip-on flanges are welded to the pipe using fillet welds on both the inside and outside of the flange, creating a secure and leak-resistant joint.
• Ease of Installation: These flanges are relatively easy to install compared to other types. They are often favored when ease of assembly is important.
• Cost-Effectiveness: Slip-on flanges are typically less expensive than some other flange types, making them a cost-effective choice for certain applications.
• Low-Pressure Systems: They are suitable for applications with low internal pressures. However, they are not recommended for high-pressure systems.

Application across Industries:

• Petrochemical Industry: Connecting pipes for fluid transport in non-critical, low-pressure processes.
• Oil and Gas Industry: Joining pipelines for crude oil, natural gas, and refined products in lower-pressure sections.
• Water Treatment Plants: Linking pipes for treated water, wastewater, and chemicals in systems with moderate pressures.
• Chemical Industry: Integrating pipes in chemical processing for non-high-pressure or corrosive applications.
• Power Generation: Joining pipes for steam, cooling water, and fluids in power plants operating at lower pressures.

We produce slip-on flanges by utilizing a wide array of materials and grades, tailored to effectively meet the unique requirements of our clients spanning diverse industries.

STAINLESS STEEL & DUPLEX STEEL SLIP-ON FLANGES:
Specifications:

• Size : 1/2″ NB to 48″ NB, ANSI/ASME B 16.5
• Standard : 150# , 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300
• Stainless Steel : ASTM A 240 / 182 F – 304/
  304H/ 304L/ 316/ 316H/ 316L/ 316Ti/ 309/ 310/ 317L/ 321/ 347/ 904L/Alloy 20
• Duplex steel : ASTM A 182 – F 51, F53, F55

ALLOY STEEL, CARBON STEEL & LTCS WELD NECK FLANGES:
Specifications:

• Size : 1/2″ NB to 48″ NB, ANSI/ASME B16.5
• Class : 150# , 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300
• Alloy Steel : ASTM A 182 – F5, F9, F11, F12, F22 & F91
• Carbon Steel : ASTM A 105, ASTM A694, F42, F46, F52, F60, F65, F70
• Low Temperature Carbon Steel : A 350 LF2, A 516 GR. 70

COPPER & NICKEL ALLOYS SLIP-ON FLANGES:
Specifications:

• Size : 1/2″NB to 6″ NB, ANSI/ASME B 16.5
• Standard : 150# , 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300
• Copper Nickel : C70600(90: 10). C71500 (70:30), C71640
• Nickel : UNS N02200, N02201
• Monel : UNS N04400
• lnconel : UNS N06600, N06601, N06625, N08800, N08810, N08825
• Hastelloy : UNS N10276, N06022, N10665, N06455
• Titanium Gr: 1,2,3 DTH 3.7025, DTH 3.7035, DTH 3.7055
• SMO 254: UNS S31254